Home > Solutions > Video Production & Post Production > Gefen > Extenders > HDMI >

  Gefen HDMI 1.3 Over Fiber with IR
The Reliable and Simple Solution for Extending HDMI 1.3 -- up to 330m / 1000 feet


 
Alternative Views:


Our Price: $1,499.00

Product Code: EXT-HDMI1.3IR-FO-141

Description
 

The Reliable and Simple Solution for Extending HDMI 1.3 -- up to 330m / 1000 feet

The Gefen HDMI 1.3 Over Fiber with IR system extends Full 1080p HD Deep Color with multichannel digital audio over a single small strand of fiber optic cable that can easily be hidden in a wall or above a ceiling. Great distances of extension can be obtained thanks to the use of fiber optic cable.

1080p Full HD Deep Color is displayed at the destination with no signal delays and no EMI (electromagnetic interference) disturbances such as cut-outs and pixilation, phenomena that can happen often with copper cables, especially at long distances. Multichannel digital audio with Dolby TrueHD & DTS Master Audio helps to deliver a full HD audio/video home theater experience wherever it is needed. The IR back channel is carried on the CAT5 cable, providing convenient, local control of video source devices.

How It Works

Install the Sender near your High Definition source and the Receiver at the Display side. Connect HDMI cables from the Sender to your source and from Display to Receiver. Run a single strand of SC fiber optic cable from Sender to Receiver for AV signals, then run a single CAT5 cable from Sender to Receiver for the IR back channel. Plug in the power supplies on the Sender and Receiver, and crisp vibrant HDMI 1.3 video will appear on the Display. IR commands from the remote control to video source equipment are sent across the IR back channel via the CAT5 cable which connects the Sender and Receiver at their RJ45 jacks.

HDMI 1.3 Features:
  • 340 MHz (up to 16 bit YUV 444 supported @ 1080p)
  • Deep Color Supported (XV Color Supported)
  • Dolby TrueHD & DTS Master Supported
  • Lip-Sync Pass Through
  • CEC Protocol Pass Through


Note:  

CAT5 cable is optional for IR/RS232 use.

Features:

  • Immune to electro-magnetic interference (EMI)
  • Transmits HDMI 1.3 audio/video at full bandwidth
  • 1000-foot (330m) extension distance, maximum
  • Delivers highest quality signal of any HDMI extension method
  • Supports video resolutions up to 1080p, 2K, and 1920 x 1200
  • Uses inexpensive and widely available single-strand multimode SC fiber optic cable
  • HDCP Compliant

Specifications:

  • Video Amplifier Bandwidth: 340 MHz
  • HDMI Input/Output Connector: Type A 19 Pin
  • Link Connector: SC Fiber Optic
  • CAT5 Connector: RJ45
  • Input Video Signal:1.2 volts p-p
  • Input DDC Signal: 5 volts p-p (TTL)
  • Power Supply: 5V DC
  • Dimensions: 2.75"W x 4.5"H x 1.2"D (approx)
  • Shipping Weight: 5 lbs. (approx)

Package Includes:

  • 1x HDMI 1.3 Over Fiber with IR- Sender
  • 1x HDMI 1.3 Over Fiber with IR - Receiver
  • 2x 5V DC Power Supply
  • 1x HDMI 6ft Cable
  • 1x 6-foot DB9 Serial Cable M-F
  • User's Manual



Browse for more products in the same category as this item:

Solutions > Video Production & Post Production > Gefen > Extenders > HDMI