The LiteRing connects to the camera with a specially designed adapter ring, similar to those used for matte box mounting, which is attached to the innerthread of the lens. The LiteRing is then placed on to the adapter and simply locked with a single screw. This enables users to quickly release the LiteRing in between shots, or change from a green to a blue ring based upon their chosen keying colour.

We have taken the blue or green colour away from the fabric and completely removed the need to separately light the background. The ability to change the background keying colour in seconds cannot be achieved any quicker - no need
to hang a different drape or repaint the studio walls! Tungsten, HMI and Fluorescent lights can be large in size, expensive to power and uncomfortable to work under. Typically you require thousands of watts to light absorbent chroma
key fabrics, whereas the LiteRing output of around 10 watts provides all the light required by Chromatte.

By relocating the colour and the light into one camera-mounted device, we have significantly reduced the set-up time and overcome many of the difficulties associated with conventional chroma key.

The LiteRing is available in both green and blue, and in three sizes to fit different size cameras. Each size of ring has a series of adapters to ensure maximum compatibility with camera lens sizes. Further custom adapters and fixing mechanisms are available.

Small
72mm with adapters for 72 | 62 | 58 | 52 | 37 | 30 lenses

Medium
112mm with adapters for 105 | 95 | 94 | 86 | 82 | 80 | 77 | 72 | 67 lenses

Large
147mm with an adapter to fit 127 lens