|
|
|
|
|
|
|
|
|
|
|
|
|
|
Upgrade your URSA's sensor or change its lens mount
with the URSA 4.6K Turret with PL Mount from Blackmagic Design . The
turrent includes the sensor, lens mount, and lens control connections.
It attaches via four bolts.
|
Upgrade your URSA's sensor or change its lens mount
with the URSA 4.6K Turret with active Canon EF Mount from Blackmagic
Design . The turrent includes the sensor, lens mount, and lens control
connections. It attaches via four bolts.
|
The Blackmagic Design PS-OGX is a redundant power supply for the oGx open gear frame. The oGx is a 2RU high-density openGear® modular frame offering 600 Watts of total power in a high-capacity 20-slot format. It uses the same form factor and DashBoard™ remote control as Blackmagic Design's other 20-slot frames and supports all openGear compatible cards and rear I/O modules, but offers significantly more available user power. The oGx is designed to meet the demands of today's most complex IP and hybrid infrastructures, supporting evolving IP and UHD applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Blackmagic Design PS-OG3 OpenGear Redundant Power Supply Unit is designed for use with the OpenGear Converters.
|
The Blackmagic Design 12G BD SFP Optical Module Adapter is a spare host
adapter for the ATEM Studio Converter, ATEM Talkback Converter and
Blackmagic Studio Cameras. This adapter is fully utilized by products
that support 12G SDI.
|
Be ready to shoot anywhere! Kit includes shoulder pad with built in rosettes, rail mounts, integrated tripod quick lock release and top handle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The URSA Mini Pro B4 Mount from Blackmagic Design is a replacement mount for use on the URSA Mini Pro. This mount enables using your ENG-style B4 mounted HD lens on your URSA Mini Pro. The mount incorporates corrective optics that enable the use of a lens designed to work on a camera with three sensors and a prism, on the URSA Mini Pro, which is a single-sensor camera, without the image suffering from optical degradation.
The lens mount accepts lenses with a B4 lens mount and features a locking lever to engage the mount's lock. The included shim kit enables precise flange distance adjustment when installing this mount on your camera.
The integrated optics support HD resolution and are designed with spherical-aberration correction that compensate for the lens being used on a single-sensor camera while designed for a three-sensor/prism-block camera.
|
|
Mount B4 lenses on your URSA Mini with this B4 Lens Mount from Blackmagic Design. This lens mount replaces the existing PL mount on your URSA Mini and features corrective optics, which counteract spherical aberration inherent in B4 lens designs (to compensate for the trichroic prism in 3-chip cameras). In addition, this mount's optics expand the image circle of the attached lens to cover a central image portion of the sensor, enough to provide a Full HD image. Servo functionality can be enabled by connecting the lens to the URSA Mini via the broadcast lens controller port, located near the mount. This mount is only compatible with URSA Mini cameras that have a PL mount.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The URSA Mini Pro PL Mount from Blackmagic Design is a replacement mount for use on the URSA Mini Pro that enables you to mount PL lenses on your camera. The PL mount incorporates electronic contacts compatible with the Cooke i/Technology protocol, which allows lens information to be saved as metadata. The included shim kit enables precise flange-distance adjustment when installing this mount on your camera.
|
Blackmagic Pocket Camera Battery Grip
Designed for the Blackmagic Pocket Cinema Camera 4K, the Pocket Battery Grip lets you replace the camera's standard LP-E6 battery with two L-series batteries so you can shoot for over 2 hours on a single charge! It's perfect for anyone that needs to shoot for extended periods of time. Featuring a unique carbon fiber design, non-slip hand grips, and a slide out tray that holds 2 L-series batteries, the Pocket Battery Grip also makes it easier to hold the camera on longer shoots. L-Series batteries are standard batteries used for a variety of professional lighting equipment, so they're readily available. You can even charge the batteries in the grip via the camera's 12V DC connection in between takes! Please note! Batteries Not Included.
|
The Blackmagic Design BMD-BMURSACA/HGRIP is a handgrip for your Blackmagic URSA Mini Camera. The
URSA Mini family are powerful and robust cameras that are available in
five different versions, so you can choose the camera that best suits
your needs. Choose the affordable URSA Mini 4K and URSA Mini 4.6K models
with cinema quality, fixed EF or PL lens mounts, and dual C-Fast card
recorders. Or choose the all new, advanced URSA Mini Pro 4.6K that adds
built in ND filters, an interchangeable lens mount, dual C-Fast UHS-II
SD card recorders and powerful broadcast features and controls! |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Blackmagic Design BMD-PSUPPLY/XLR12V100 is a power supply brick with an attached XLR cable for the Blackmagic URSA. The rick has an open slot for an IEC cable (sold separately).
|
The Blackmagic Design UltraStudio/DeckLink Studio Cable (6') is a 6’ long replacement cable for the UltraStudio Pro/DeckLink Studio.
|
The Blackmagic Design 6G BD SFP Optical Module Adapter is a spare host adapter for the ATEM Studio Converter, ATEM Talkback Converter and Blackmagic Studio Cameras. This adapter is fully utilized by products that support 6G SDI and according to Chris Pearse, Blackmagic Design Product Specialist, "The module uses LC connectors, and is intended to be used with 1310nm, Single Mode fiber". And just like the 3G version, the ADPT-3GBIOPT, the ADPT-6GBIOPT is a Duplex transceiver and works in either Singlemode (SM) or Multimode (MM). Singlemode (SM) is recommended.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Studio Fiber Rack Kit is a rack mount kit for the Studio Fiber Converter. Rack mount up to 2 Blackmagic Studio Fiber Converters side by side with this lightweight kit that's perfect for road cases or equipment racks.
|
The URSA Mini Pro EF Mount from Blackmagic Design is a replacement mount for use on the URSA Mini Pro and is available as a spare mount, as the URSA Mini Pro comes with an EF mount installed. The mount incorporates the electronic connections that allow the lens to work with the camera. The included set of shims enables precise flange-distance adjustment when installing this mount on your camera.
|
6.6 foot cable to connect Multbridge Pro or Extreme to card.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The BMD-BMURSASVF/HOOD is a hood to work with and add on to the URSA Broadcast Camera.
|
The Blackmagic 10G Ethernet module is a 10Gb Ethernet optical module with LC compatible fiber optic connection for use with Teranex IP or Camera/Studio Fiber Converter.
|
The Decklink HD Extreme Breakout Cable from Blackmagic Design
is designed to facilitate the input and output of various signal types
with your audio-video system. It features a serial connector on one end
and (14) different input and output connectors on the other end.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add a shock and vibration isolated professional microphone mount to your URSA Mini or URSA Mini Pro camera!
|
Blackmagic URSA Mini Extension Arm
|
This is a replacement 12V Power Supply compatible
with select Blackmagic Design products, including the HyperDeck Studio
Recorder, UltraStudio Pro, 3D Capture and Playback devices, ATEM Studio
Converter, Blackmagic Cinema Camera 2.5K (EF/MFT models), SmartView Duo
and HD Monitors, ATEM Television Studio Production Switcher, SmartScope
Duo 4K, and Blackmagic Production Camera 4K. It includes international
wall socket adapters for worldwide use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Black Magic Design Studio Camera Power Supply
is a power supply brick that attaches to the XLR connector of your
camera. You can connect it to a wall socket via one of the included
Blackmagic Design wall-socket adapters.
|
This Power Supply for DaVinci Control Surfaces and ATEM Switchers (12V / 70W) from Blackmagic Design
is a replacement or backup power supply for the following products:
ATEM 1 M/E Production Switcher, ATEM 2 M/E Production Switcher, ATEM 1
M/E Broadcast Panel, and DaVinci Resolve Control Surface.
|
Bringnig analog audio into an ATEM 1M/E or 2M/E
switcher requires a Blackmagic Design Audio Breakout Cable to interface
with the switcher's DB-15HD connector. The breakout cable is
approximately two feet long, terminating in six XLR connectors that
support two channels of input and output audio, as well as timecode in
and out. Each cable is shielded to protect your signals.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Blackmagic Design BMD-BMUMCA/SKWNUT is a 2-pack set of spare or replacement wing nuts for use with various accessories for your Blackmagic URSA Mini Camera.
|
Create a custom camera control solution with the 3G-SDI Arduino Shield from Blackmagic Design. Working in conjunction with a separately available Arduino controller, the Shield embeds an SDI control signal in the Program return feed that will operate compatible cameras, such as the Blackmagic Studio Camera or URSA Mini with the Studio Camera firmware update. These are the same controls output via an ATEM series switcher.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This V-Mount Battery Plate from Blackmagic Design allows you to attach third party V-Mount batteries to your URSA camera. The VLock connects directly to the back of the URSA, avoiding the need for extra cabling.
Includes a D-Tap port for accessory power
|
Blackmagic Design URSA Gold Battery Plate is a Gold mount compatible battery plate with Molex connector for attaching third party batteries to URSA cameras.
|
Adapter - 3GBD SFP Optical Module
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Blackmagic Design Sunshade for Production Camera
4K and Cinema Camera is an exact match for the original sunshade that
came with your Cinema Camera or Production Camera 4K. The shade protects
the large camera view screen from veiling glare and bright overhead
sun.
|
Blackmagic URSA Mini Top Handle
|
Teranex Mini are designed to be racked side by side, with three converters fitting in 1RU, six in 2RU, and nine in 3RU. When multiple units are racked side by side, variable speed fans pull from one unit into the next to facilitate optimal air flow. If a fan fails adjacent Teranex Mini will increase fan speed, to prevent overheating! And because they’re small and lightweight, you can even mount them in the rear of a rack or road case!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Blackmagic Design PSUPPLY-INT12V10W is a
replacement power supply that can be used with any Mini Converter in the
series as well as the HyperDeck Shuttle. As with the original unit,
this power supply includes socket adapters for international countries
and also features a cable tie to prevent the wire from becoming
accidentally disconnected.
|
This URSA Mini Pro Shim Kit from Blackmagic Design includes 9 shims and a baffle tool. The kit permits you to adjust the flange focal distance of your mount to meet the exacting tolerances required for the maximum lens performance.
These precision cut shims allow the mount to pass electronic information from camera to lens mount and can be used with any of the replaceable lens mounts for the URSA Mini Pro.
|
The BMD-BMURSASVF/VLOCK is a VLock compatible battery plate for attaching third party batteries to URSA cameras.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Power Supply for Pocket Cinema Camera from Blackmagic Design
is used both to power the camera from AC as well as recharge a battery
in the camera. It outputs 12V DC, and features a 0.7 mm DC jack
connector specifically to fit the Pocket Cinema Camera. It takes
approximately an hour and fifteen minutes to recharge a battery while
the camera is off and approximately two hours when the camera is in use.
|
The optional Rear Support Bars from Blackmagic
Design are specifically engineered to compensate for extra load stress
associated with certain applications, such as mobile truck
installations, where supporting the rear of the OG3-FR series frame is
required.
|
Rear Support Brackets for OGX-series frames
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Breakout Cable for Intensity Pro from Blackmagic
is a replacement cable for Intensity Pro. It features input and output
connection for RCA component video and RCA audio. It also includes an
RCA connection for SPDIF/AES output. It is identical to the breakout
cable that is included with the Intensity Pro.
|
The Blackmagic Design BMD-BMCSTUD/SHADE is a replacement foldable sunshade for use with the Blackmagic Studio Camera. The large detachable sunshade protects the screen from direct sunlight and creates your own private viewing space.
|
The CABLE-CCPOC4K/DC is a DC cable pack fot the Blackmagic Pocket Camera. Now you can conveniently power your Pocket Cinema Camera 4K from a variety of different power sources. The pack includes a D-tap to 2-pin, 2.5mm barrel to 2-pin and 2-pin to fly lead to create your own custom cables. All the cables are 650mm long.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The set of eight PL Mount Shims from Blackmagic Design is a set of shims designed to change the flange focal distance of PL (positive lock) lenses mounted on URSA Digital Cinema Cameras.
|
The Blackmagic Design FSB-8310 Rear Support Bracket
is used to support the rear of DFR-8310 openGear modular frames. It
provides rear rail support on up to 30” deep racks and compensates for
additional load in applications like mobile truck installations.
|
Blackmagic Smart Remote 4 30W Power Supply
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The BMD-PSUPPLY-PC4K/30W is a Blackmagic Power Supply for the Pocket Camera 4K 12V30W.
|
The BATT-LPE6M/CAM Battery from Blackmagic Design
features a capacity of 2000mAh, 7.4V of output power and 14.8
watt-hours. Not only can it be used with the Micro Cinema and Studio
cameras, but can also be used with the Video Assist monitor.
|
Blackmagic Power Supply for Video Assist
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blackmagic Design's HYPERD/AXLRMINI2 is a set of two adapter cables for connecting the Blackmagic Video Assist to professional audio equipment which use full size XLR connectors.Expand your audio setup for pro monitoring or recording in the field or in the studio. The Blackmagic Video Assist 4K is an extremely high quality audio recorder. You get two mini XLR inputs with 48V of phantom power so you can attach external microphones to record audio with Video Assist, instead of your camera.This totally eliminates the problems with auto gain controls on DSLR cameras! With an amazing equivalent input noise floor of -128dBV, you get high quality, crystal clear audio that sounds dramatically better than camera audio! Sound is recorded into the same file as the video so you don't have to worry about AV sync between separate audio and video files!
|
Blackmagic Design's Shoulder Strap for Cinema Camera
allows for convenient carrying of the camera when on the move from
location to location. To fasten, loop the end of the strap through the
metal hook on the top of the camera, and secure through the plastic
clasp to the desired length.
|
The Blackmagic Design BMD-PSUPPLY-INT12V12W power supply is made specifically for all BlackMagic Design converters with a threaded locking power connection such as the BMD-CONVMUDCSTD/HD UpDownCross HD or the BMD-HDL-MULTIP3G/04HD MultiView 4 HD, as well as the Blackmagic Design BMD-CONVMASA4K Mini Converter SDI to Analog 4K.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Blackmagic Design Power Supply is perfect for
use with any Micro Converter or other device with a micro USB input and
with the addition of adapters, you can use it wherever you find yourself
in the world.
|
The Blackmagic Micro Studio Camera 4K-Cable is a Micro Studio Camera 4K expansion cable which adds 12V power, reference input, LANC, B4 lens control, PTZ control and S.Bus digital servo connections.
|
The Adapter cable for connecting B4 broadcast lenses to Blackmagic Micro Studio Camera 4K. Supports digital lens control and powers lens from external power supply.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Blackmagic Design BMD-CABLE-CINECAMMIC is an expansion cable for your Blackmagic Micro Cinema Camera. You'll add 12V power, reference input, LANC, composite video output, PWM and S.Bus servo connections to the Micro Cinema Camera with this expansion cable.
|
The Blackmagic BMD-CABLE-DIN/DIN allows two DIN 1.0/2.3 devices to be connected, such as a Micro Studio Camera 4K to a Blackmagic Video Assist.
|
The Blackmagic BMD-CABLE-DIN/BNCMALE is a 200 mm long cable that has the DIN 1.0/2.3 connector on one end and BNC male on the other. This cable can be used to connect a device with DIN 1.0/2.3 connector to another with a regular BNC cable. You can use this cable, for example, to connect the Micro Studio Camera 4K to Video Assist 4K or the front output of URSA Mini to Video Assist.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Blackmagic BMD-CABLE-DIN/BNCFEMALE is a 200 mm long cable that has the DIN 1.0/2.3 connector on one end and BNC female on the other. This cable can be used to connect a device with DIN 1.0/2.3 connector to another with a regular BNC cable. You can use this cable, for example, to connect to the output of a DeckLink Quad in order to use regular BNC cables.
|
Blackmagic Design URSA Viewfinder Eyecup
|
The Blackmagic Design BMD-BMUMCA/SKBOLTS is a set of 2 replacement or spare bolts for use with the Blackmagic URSA Mini Shoulder Kit. The URSA Mini Shoulder Kit adds a quick release tripod mount, shoulder pad, two front rosettes and rail mounts so you can quickly latch the camera into a tripod or instantly unlatch and move it onto your shoulder for handheld shooting. Designed to be well balanced and comfortable while sitting on your shoulder, the Blackmagic Shoulder Mount Kit makes the URSA Mini Pro perfect for roaming, ENG style shoots.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pocket Cinema Camera - Battery
|
The Blackmagic Design BMD-R3-BLANK is a blank plate for openGear 20 Slot Frame Rear Module.
|
The Blackmagic Design BMD-BMUMCA/XLRCABLE is a set of replacement XLR audio input cables for your Blackmagic URSA Mini Pro Camera.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blackmagic Thumbscrew for URSA Camera EVF (1/4''-20)
|
Blackmagic Tensioning Screws for URSA Camera EVF
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Blackmagic Design BMD-BMCASS/LENSCAPPL is a replacement lens cap for the URSA Camera, Production Camera 4K, or Cinema Camera with PL mount. These caps are an integral accessory as they help protect and prevent dust and debris from infiltrating the body of your camera.
|
The Blackmagic Design BMD-BMCASS/LENSCAPMFT is a replacement lens cap for the URSA Camera, Pocket Cinema or Cinema Camera, and Micro Studio Camera 4K with MFT mount. These caps are an integral accessory as they help protect and prevent dust and debris from infiltrating the body of your camera.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Blackmagic Design BMD-BMCASS/LENSCAPEF is a replacement lens cap for the URSA Camera, Cinema Camera or Production Camera 4K with EF mount. These caps are an integral accessory as they help protect and prevent dust and debris from infiltrating the body of your camera.
|
|
The Blackmagic Design BMD-CABLE-URSA/LANC3 is a 350 mm LANC cable for use with an external remote control and your Ursa Mini Pro. You can control your camera and lenses remotely using the universal standard 2.5mm LANC input based remote control. You can simply connect a LANC controller to get easy remote control of camera start/stop as well as control over iris and focus!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Blackmagic Design BMD-CABLE-URSA/LANC1 is a 180 mm LANC cable for use with an external remote control and your Ursa Mini Pro. You can control your camera and lenses remotely using the universal standard 2.5mm LANC input based remote control. You can simply connect a LANC controller to get easy remote control of camera start/stop as well as control over iris and focus!
|
Blackmagic URSA Mini Pro Mount Screws (EF Lens)
|
Blackmagic URSA Mini Pro Mount Screws (B4 Lens)
|
|
|
